The 4-Stage Balance Test: Difference between revisions
No edit summary |
No edit summary |
||
Line 26: | Line 26: | ||
Not being able to hold the tandem stance (task number 3) for 10 seconds is an indication of increased risk of fall. <ref name=":0" /> | Not being able to hold the tandem stance (task number 3) for 10 seconds is an indication of increased risk of fall. <ref name=":0" /> | ||
=== Reliability === | === Reliability === | ||
Interclass (Pearson) correlations, with time between test and re-test of 3-4 months, 187 subjects from the community) is reported as moderate (0.66) <ref name=":1">Rossiter-Fornoff JE, Wolf SL, Wolfson LI, Buchner DM, FICSIT Group. [[A cross-sectional validation study of the FICSIT common data base static balance measures.]] The Journals of Gerontology Series A: Biological Sciences and Medical Sciences. 1995 Nov 1;50(6):M291-7.</ref> | Interclass (Pearson) correlations, with time between test and re-test of 3-4 months, 187 subjects from the community) is reported as moderate (0.66) <ref name=":1">Rossiter-Fornoff JE, Wolf SL, Wolfson LI, Buchner DM, FICSIT Group. [[A cross-sectional validation study of the FICSIT common data base static balance measures.]] The Journals of Gerontology Series A: Biological Sciences and Medical Sciences. 1995 Nov 1;50(6):M291-7.</ref> | ||
Revision as of 14:17, 20 September 2020
Top Contributors - Gabriele Dara, Lucinda hampton, Shaimaa Eldib, Admin and Kim Jackson
Objective[edit | edit source]
To evaluate static balance.[1]
Intended Population[edit | edit source]
The test is intended to be performed on older adults.[1]
Method of Use[edit | edit source]
The test, performed from a standing position, involves 4 different tasks which are progressively increasing in difficulty. Each posture is maintained for a maximum of 10 seconds which are recorded by the therapist with a stopwatch. The latter is responsible for pronouncing "start" and "stop" at the beginning and end of each task respectively.
A description of each of the 4 tasks is presented below:
1) The subject is asked to maintain the standing position while keeping the feet side-by-side ("parallel stance"). 2) The patient is asked to hold a "semi-tandem" position in which the subject's preferred foot is placed forward. 3) In the third task, the subject is required to hold a tandem stance for 10s. 4) In the fourth and last task, the subject is asked to maintain balance in a single-leg stance.
NOTE: If the subject is not able to sustain the posture for at least 10 seconds, the test is stopped and the therapist must record the number of seconds which were completed. [2]
Outcome[edit | edit source]
Not being able to hold the tandem stance (task number 3) for 10 seconds is an indication of increased risk of fall. [1]
Reliability[edit | edit source]
Interclass (Pearson) correlations, with time between test and re-test of 3-4 months, 187 subjects from the community) is reported as moderate (0.66) [3]
Validity[edit | edit source]
A robust correlation has been reported when comparing the scale with other measurements for balance, in the same subjects. [3]
References[edit | edit source]
- ↑ 1.0 1.1 1.2 Phelan EA, Mahoney JE, Voit JC, Stevens JA. Assessment and management of fall risk in primary care settings. Medical Clinics. 2015 Mar 1;99(2):281-93.
- ↑ Gardner MM, Buchner DM, Robertson MC, Campbell AJ. Practical implementation of an exercise‐based falls prevention programme. Age and ageing. 2001 Jan 1;30(1):77-83.
- ↑ 3.0 3.1 Rossiter-Fornoff JE, Wolf SL, Wolfson LI, Buchner DM, FICSIT Group. A cross-sectional validation study of the FICSIT common data base static balance measures. The Journals of Gerontology Series A: Biological Sciences and Medical Sciences. 1995 Nov 1;50(6):M291-7.