Box and Block Test: Difference between revisions

No edit summary
No edit summary
Line 21: Line 21:


== Method of Use  ==
== Method of Use  ==
'''Equipment Required:'''
*Stopwatch
*Wooden box dimensioned in 53.7 cm x 25.4 cm x 8.5 cm
*Partition (should be placed at the middle of the box, dividing it in two containers of 25.4 cm each)
*150 wooden cubes (2.5 cm in size)
'''Set-Up:'''
*A test box with 150 blocks and a partition in the middle is placed lengthwise along the edge of a standard-height table
*The patient should be seated on a standard height chair facing the box 150 blocks should be in the compartment of the test box on the side of the patient’s dominant hand
*The examiner should face the patient so she or he could view the blocks being transported
'''Description:'''
The patient is allowed a 15-second trial period prior to testing
*Individuals are seated at a table, facing a rectangular box that is divided into two square compartments of equal dimension by means of a partition.
*One hundred and fifty, 2.5 cm, colored, wooden cubes or blocks are placed in one compartment or the other.
*The individual is instructed to move as many blocks as possible, one at a time, from one compartment to the other for a period of 60 seconds.
*Standardized dimensions for the test materials and procedures for test administration and scoring have been provided by Mathiowetz et al, 1985.
*To administer the test, the examiner is seated opposite the individual in order to observe test performance.
*The BBT is scored by counting the number of blocks carried over the partition from one compartment to the other during the one-minute trial period.
*Patient’s hand must cross over the partition in order for a point to be given, and blocks that drop or bounce out of the second compartment onto the floor are still rewarded with a point.
*Multiple blocks carried over at the same time count as a single point.
*Higher scores on the test indicate better gross manual dexterity


== Reference<br>  ==
== Reference<br>  ==

Revision as of 15:16, 4 August 2014

Original Editor - Your name will be added here if you created the original content for this page.

Top Contributors - Sinead Greenan, Kim Jackson, Scott Buxton, Oyemi Sillo, Evan Thomas, WikiSysop, Adam Vallely Farrell, 127.0.0.1, Admin and Candace Goh  

Objective
[edit | edit source]

The Box and Block Test is an objective measure of assessing unilateral gross manual dexterity

Intended Population
[edit | edit source]

Those with a range of neurological diagnoses including:

  • Stroke
  • Multiple Sclerosis
  • Traumatic Brain Injury (TBI)
  • Neuromuscular Disorders
  • Geriatric
  • Spinal Cord Injury (SCI)
  • Fibromyalgia

Method of Use[edit | edit source]

Equipment Required:

  • Stopwatch
  • Wooden box dimensioned in 53.7 cm x 25.4 cm x 8.5 cm
  • Partition (should be placed at the middle of the box, dividing it in two containers of 25.4 cm each)
  • 150 wooden cubes (2.5 cm in size)

Set-Up:

  • A test box with 150 blocks and a partition in the middle is placed lengthwise along the edge of a standard-height table
  • The patient should be seated on a standard height chair facing the box 150 blocks should be in the compartment of the test box on the side of the patient’s dominant hand
  • The examiner should face the patient so she or he could view the blocks being transported

Description:

The patient is allowed a 15-second trial period prior to testing

  • Individuals are seated at a table, facing a rectangular box that is divided into two square compartments of equal dimension by means of a partition.
  • One hundred and fifty, 2.5 cm, colored, wooden cubes or blocks are placed in one compartment or the other.
  • The individual is instructed to move as many blocks as possible, one at a time, from one compartment to the other for a period of 60 seconds.
  • Standardized dimensions for the test materials and procedures for test administration and scoring have been provided by Mathiowetz et al, 1985.
  • To administer the test, the examiner is seated opposite the individual in order to observe test performance.
  • The BBT is scored by counting the number of blocks carried over the partition from one compartment to the other during the one-minute trial period.
  • Patient’s hand must cross over the partition in order for a point to be given, and blocks that drop or bounce out of the second compartment onto the floor are still rewarded with a point.
  • Multiple blocks carried over at the same time count as a single point.
  • Higher scores on the test indicate better gross manual dexterity

Reference
[edit | edit source]

Evidence[edit | edit source]

Reliability[edit | edit source]

Validity[edit | edit source]

Responsiveness[edit | edit source]

Miscellaneous
[edit | edit source]

Links[edit | edit source]

Recent Related Research (from Pubmed)[edit | edit source]

Extension:RSS -- Error: Not a valid URL: Feed goes here!!|charset=UTF-8|short|max=10

References[edit | edit source]

References will automatically be added here, see adding references tutorial.