Cycling Biomechanics

Original Editor - Your name will be added here if you created the original content for this page.

Top Contributors - Michelle Lee, Lucinda hampton, Wanda van Niekerk, Evan Thomas, Kim Jackson, Vidya Acharya, Laura Ritchie, Scott Buxton, Naomi O'Reilly and WikiSysop  

Introduction

Cycling was initiall invented by Baron Carl von Drais in 1817, but not as we know it. This was a machine which intailed two wheels which were connected by a wooden plan with a rudder device for steering, that involved people running along the ground whilst sitting down; giving them the name of a 'running machine' (in all senses) or a velocipied. This was solely used by the male population at the time of invention. The velocipied then made a huge design development in the 1860's where Michaux factory in Paris. They added leaver arms to the fron wheel which were prepelled by pedals at the feet. This was the first conventional bicycle, and since then up until the current day the bicyle has made great design and technological advances. 

A survey in 2014 estimated that over 43% of the United Kingdom population have or have access to a bike and 8% of the population aged 5 and above cycled 3 or more times a week.  With such a large amount of people cycling, whether it be professional, recreational or for commuting this increase the chance of developing an injury, so it is time we understood the biomechanics of cycling. 

3 Points of Contact

There are 3 points of contact in cycling. Meaning 3 points of the body that make contact with the bike:

• Pelvis on the saddle
• Hand on the handlebars
• Foot on the pedal 

Something to be aware of is that these areas can undergo sustained amounts of pressure and compression which can cause numbness, pain and weakness. 

Phases of Cycling / Pedaling

There are 2 main phases of the pedal cycle; the power phase and the recovery phase. If you imagine the pedal cycle as a clock phase and you start with the pedal at 12 o'clock, this is known as Top Dead Centre (TDC). The pedal is then pushed down from 12 until 6 o'clock, this position is known as Bottom Dead Centre (BDC). The pahse between the 2 is known as the Power Phase where all the force is generally generated to propell the bike forward. 

The transition from BDC back upto TDC is known as the Recovery Phase. Now not all of the muscles switch of during this phase, it just is not as active as the Power Phase. 

Lets take a look at what muscles are working at which points during the pedal cycle 

References

References will automatically be added here, see adding references tutorial.