Blackburne-Peel Ratio: Difference between revisions
Fitim Cami (talk | contribs) (Created page with "The Blackburne-Peel ratio is used to assess patellar height, and determine presence of patella alta. A lateral radiograph of the knee with 30 degrees of flexion is obtained, and ...") |
No edit summary |
||
Line 1: | Line 1: | ||
The Blackburne-Peel ratio is used to assess patellar height, and determine presence of patella alta. A lateral radiograph of the knee with 30 degrees of flexion is obtained, and a horizontal line at the level of the tibial plateaux is drawn. Perpendicular to this line vertically and a measurement (B) made of the distance between the horizontal line and the inferior aspect of the patellar articular surface. A second measurement (A) is made along the patellar articular surface. | The Blackburne-Peel ratio is used to assess patellar height, and determine presence of patella alta. A lateral radiograph of the knee with 30 degrees of flexion is obtained, and a horizontal line at the level of the tibial plateaux is drawn. Perpendicular to this line vertically and a measurement (B) made of the distance between the horizontal line and the inferior aspect of the patellar articular surface. A second measurement (A) is made along the patellar articular surface. <ref>Syed A. Ali, Robert Helmer and Michael R. Terk; Patella Alta: Lack of Correlation Between Patellotrochlear Cartilage Congruence and Commonly Used Patellar Height Ratios; AJR November 2009 vol. 193 no. 5 1361-1366. (Level of evidence: B)</ref> <br>• A/B is a measure of patellar height<br> Normal value = ratio of 0.8. <br> Patella alta = ratio >1.0 | ||
<ref>Syed A. Ali, Robert Helmer and Michael R. Terk; Patella Alta: Lack of Correlation Between Patellotrochlear Cartilage Congruence and Commonly Used Patellar Height Ratios; AJR November 2009 vol. 193 no. 5 1361-1366. (Level of evidence: B)</ref> | |||
<br>• A/B is a measure of patellar height<br> Normal value = ratio of 0.8. <br> Patella alta = ratio >1.0 | == References == | ||
<references /> |
Revision as of 12:02, 5 September 2012
The Blackburne-Peel ratio is used to assess patellar height, and determine presence of patella alta. A lateral radiograph of the knee with 30 degrees of flexion is obtained, and a horizontal line at the level of the tibial plateaux is drawn. Perpendicular to this line vertically and a measurement (B) made of the distance between the horizontal line and the inferior aspect of the patellar articular surface. A second measurement (A) is made along the patellar articular surface. [1]
• A/B is a measure of patellar height
Normal value = ratio of 0.8.
Patella alta = ratio >1.0
References[edit | edit source]
- ↑ Syed A. Ali, Robert Helmer and Michael R. Terk; Patella Alta: Lack of Correlation Between Patellotrochlear Cartilage Congruence and Commonly Used Patellar Height Ratios; AJR November 2009 vol. 193 no. 5 1361-1366. (Level of evidence: B)