Transfers

Welcome to Understanding Basic Rehabilitation Techniques Content Development Project. Please do not edit unless you are involved in this project, but please come back in the near future to check out new information!! If you would like to get involved in this project and earn accreditation for your contributions, please get in touch!

Original Editors - Naomi O'Reilly and Robin Tacchetti

Top Contributors - Naomi O'Reilly and Jess Bell      

Introduction

A transfer can be viewed as the safe movement of a person from one place or surface to another and an opportunity to train an individual to enhance independent function. In both cases, the clinician must choose the most efficient and safest method. Research shows that injuries to health and social care workers happen most frequently during patient transfers, with up to one third of workplace injuries in hospitals and nursing homes occurring when staff try to move patients. Controlling a patient’s movement while moving them from one position or surface to another or preventing a patient from falling requires that the clinician be close to the patient’s center of motion (COM), which is typically located between the shoulders and the pelvis. When these control points are used, patient transfers are more efficient, and patient safety is enhanced. The most efficient way to enhance the patient’s movement (unless they are completely dependent) is to encourage movement of the body’s distal component—the part of the body farthest from the trunk. For example, when assisting a patient to stand from a seated position, a common verbal cue is to ask the patient to lean their trunk forward. It is also important to have the patient look in the direction of the transfer’s destination to encourage correct head-turning.

Indications

Factors Affecting Transfers

Patient Factors

Principles of Transfers

Before transferring a patient, it is important to assess the situation and consider the following to help you decide to decide how much the patient can assist and what method of transfer should be used:

Level of Support

1. Dependant; Patient unable to assist and does not actively participate in the transfer. The clinician performs all aspects of the transfer.
2. Assisted; Patient actively participates but requires assistance.
3. Independent; Performs all aspects of the transfer including set up in a safe manner and without assistance.

Level of Assistance

1. Independant
   • is able to transfer independently and safely.
   • no assistance required.
2. Stand By Assistance
   • requires no physical assistance but may require verbal cues.
3. Close Guard Assistance
4. Contact Guard Assistance
5. Minimal Assis;
   • is cooperative and reliable, but needs minimal physical assistance with the transfer.
   • requires minor physical exertion from health and social care worker during transfers
   • is able to perform 75% of the required activity on their own.
6. Moderate Assist
   • requires more than minor physical assistance.
   • often needs equipment to assist with transfers.
   • is able to perform 50% of the required activity on their own.
7. Maximum Assist;
   • requires full physical assistance for all transfers.
   • may be unpredictable and uncooperative.
   • requires equipment to assist with transfers
   • is able to perform 0-25% of the required activity on their own.

Overview of Transfers

Assistive Devices for Transfers

1. Sliding Sheets; A sliding sheet or any short sheet can be used as a sliding aid. There are also specially designed roller sheets. These are made of special fabrics that have low-friction inner surfaces. The layers of fabric roll or slide over one another during the patient transfer.
2. Transfer Belts; A transfer belt is placed around the patient's waist and secured snugly. The belt can be adjusted to fit different patients and usually fastens with velcro and a buckle. If the transfer belt has loops, hold these loops to support the patient more firmly during transfer; if the belt does not have loops, hold onto the belt itself. You should use a transfer belt with patients who can partially support their own weight but need assistance. Studies show that using a transfer belt increases patient satisfaction. Lifting patients manually without a transfer belt may cause the patient discomfort under the arms. Patients also prefer the transfer belt because they feel more secure.
3. Transfer Boards; Transfer boards are also used, which are small pieces of rigid wood or plastic used to bridge the gap between two surfaces.. These may use various low-friction or roller technology transfer boards also available so that the patient can be pulled across easily.
4. Sit to Stand Hoist: Device used to assist patients from a sitting to standing position.
5. Hoist; A hoist is a mechanical lift or hydraulic lift, that can be free standing or attached to a ceiling, used to move patients who cannot bear weight, who are unpredictable or unreliable, or who have a medical condition that does not allow them to stand or assist with moving.

Principles of Transfers

Clinical Significance

Resources

References