Foot Orthotics Assessment

Original Editor - Carin Hunter based on the course by Donna Fisher
Top Contributors - Carin Hunter, Jess Bell, Kim Jackson, Lucinda hampton, Ewa Jaraczewska and Tarina van der Stockt

An Orthotics is a branch of medicine dealing with the making and fitting of orthotic devices. There are many interchangeable terms for this, a few being Foot Orthotic/orthosis/insole/shoe insert.

Three Main Types of Foot Orthoses

1. Off the shelf (OTS) Insoles
2. Functional Foot Orthoses (FFO)
3. Custom Moulded Total Contact Insoles (TCI)

What do foot orthoses do?

1. Support
2. Correct, if mobile
3. Accommodate if not
4. Shock absorption
5. Re-distribute pressure

Basic Foot Anatomy

1. 28 bones
2. 33 joints
3. Ligaments
4. Tendons
5. Muscles
6. Joints
7. Plantar aponeurosis

Plantar aponeurosis

• The plantar fascia is not a nerve, tendon or muscle, but a strong fibrous tissue. This stiff and relatively impermeable covering helps to protect the muscles of the sole of the foot.

• This tissue originates deep within the plantar surface of the calcaneus fanning out across the met heads, it divides and attaches to the base of the phalanges of each toe.

• During walking, as the toes dorsiflex at push off the plantar fascia wraps around the metatarsal heads and tightens. This pulls the calcaneus towards the metatarsal heads and in turn maintains the shape of the longitudinal arch and supports the foot to enable propulsion. This is a phenomenon known as the windlass mechanism.

Windlass Mechanism

• Hicks first described the windlass mechanism in1954 as a one-to-one coupling between metatarsal joint dorsiflexion and medial longitudinal arch rise. Based on an engineering concept of lifting weights via a pulley system

• He proposed that dorsiflexion of the toes tightens the plantar aponeurosis and pulls the metatarsal heads towards the calcaneus thereby increasing the structural height of the longitudinal arch.

Windlass Mechanism/Arch spring

• This action occurs naturally at push off in gait cycle as toes dorsiflex and the foot becomes stiffer to aid

propulsion.

• During loading and mid stance the arch will stretch. The human foot is flexible by its nature of many articulations and requires to be flexible at times and rigid at other times to promote normal gait. Important to remember that the plantar fascia will stretch and recoil at different stages of the gait cycle.

Important Joints with regards to Foot Orthosis for ROM in the Foot/Ankle

1. Hindfoot
   1. Talocrural Joint
   2. Sub Talar joint
2. Mid Foot-
   1. TMT,
   2. calc/cub,
   3. talo/nav
3. Fore Foot
   1. 1st MPT Joint

Anatomy/Terminology

VALGUS/EVERTED

NEUTRAL

VARUS/INVERTED

Pronation – eversion, abduction, d/f & medially rotated STJt

Supination- inversion, adduction, p/f & laterally rotated STJt

Purpose of human foot

• LA Bolgla · 2004

• “It enables propulsion through space, adaptation to uneven terrain, absorption of shock, and support of body weight.”

• Complex mechanism, Number of theories of biomechanics

• Structure and function and position leave the foot exposed to risk of injury

• To understand foot it is key to ax in NWTB and WTB and during gait.

Orthotic Foot Ankle Assessment

1. Patient History
2. ROM
3. Muscle Power
4. Sensation/Pain
5. Proprioception
6. Biomechanical Analysis
7. Leg length
9. Patient History

o Biomechanical Analysis as they walk in

2. Range of Motion

o Passive

o Active

Orthotic Foot Ankle Assessment

Movements in foot/ankle

o Dorsiflexion/ Plantarflexion - Ankle Joint

o Pronation/ Supination – Subtalar joint

o Eversion/ Inversion

o Abduction/ Adduction

o Toe flexion/ extension – MTP joints

Non weight bearing assessment

•Windlass Test- can be effective in examining dysfunction of the plantar fascia,

although specificity has not been proved.

o Non-weight bearing or weight bearing

o Passively extend hallux at MTP joint

o Plantar aponeurosis should tighten and reduces dist between calcaneus and Metatarsals.

o Note angle of extension to initiate arch, can vary

o Increase MLA

o Positive test= A positive test is considered if passive extension is continued to end range or until the patient's pain is reproduced in Plantarfascitis

o Pain in medial calcaneus and plantarfascia on palpation

Non weight bearing assessment

•Hallux Limitus/rigidus

• Hallux Rigidus- very limited dorsiflexion mobility or no mvt. there is crepitation with joint mobilization and pain associated with any movement of the first MTP joint.

• Hallux limitus (FnHL)reduced dorsiflexion movement, resulting in reduced range of dorsiflexion of the first MTP joint.

• In gait, loss of metatarsophalangeal joint extension during the second half of the single-support phase, when the weightbearing foot is in maximal dorsiflexion.

• Both affect the windlass mechanism and gait pattern and normal functioning of the foot.

3. Muscles around foot/ankle- oxford scale

4 compartments

o Superficial Posterior - Plantarflexors

Gastrocnemius/soleus/plantaris

o Deep Posterior-– Plantarflexes, adducts, inverts

o Tibialis Posterior

o Flexor Hallicus/Digitorum Longus

o Anterior – Dorisiflexes, Adducts, Inverts

o Tibialis Anterior

o Extensor Hallicus/Digitorum longus

o Lateral - Dorsiflexes, abducts, everts

o Peroneal Longus/brevis

Tom Dick Harry

•P/Flexors

• Tom - (The Tibialis Posterior) plantarflexes the foot at the ankle joint

and inverts the foot at the tarsal joints.

• “Dick” (The Flexor Digitorum Longus) it flexes 2-5 and plantarflexes

the foot at the ankle joint.

• Harry(Flexor Hallucis Longus) flexes the big toe, plantarflexes the

foot at the ankle joint. Strong muscle aids with propulsion.

• Dorsiflexors

• Tib Ant – Dorisiflexor/ evertor

• Lateral muscles

• Peroneal longus/brevis – plantarflexion/ eversion

• Peroneal longus- also plantarflexes 1st ray

Orthotic Foot Ankle Assessment

6. Biomechanical Analysis

Static

o Overall biomechanics of standing, knees hips pelvis

o STJt alignment – medial/lateral devn- supination

resistance test

o Too many toes, 1 & 4/5, more lateral more pronated

o Rear foot/forefoot

o Hallux extension – Jacks, Windlass test

Root V STJt equilibrium

• Sub Talar Joint Equilibrium -K. Kirby

(2001)

• Spatial location of the subtalar joint

axis in relation to the weightbearing

structures of the plantar foot

• concept of subtalar joint rotational

equilibrium

• externally generated forces, such as

GRF and internally generated forces,

such as ligamentous and tendon

tensile forces and joint compression

forces, affect the mechanical

behavior of the foot and lower

extremity

• Root Theory Model -Root (1954 – 1966)

• Basis was to classify normal & abnormal foot

types (osseous alignment). › “

• Normal/ideal foot alignment occurs when:

• Distal 1/3 of leg vertical

• Calcaneus vertical to supporting surface

• Plantar forefoot parallel to plantar rearfoot

• Variations from this “normal’ foot alignment

(‘intrinsic foot deformities’) lead to abnormal

foot function

Sub Talar Joint Equilibruim

Kirby 2001

Biomechanical Analysis - Dynamic Normal walking,

o IC heel strike,

o Loading response

o MS mid stance, single

o Terminal stance, single

o Pre swing

o Swing Phase

o ground clearance,

o Single 40% /

double support

60%

o Timing- load rate=

stress

7. Leg Length Discrepancy (LLD)

1. Dipping
2. Pelvic Obliquity
3. Retraction
4. Scoliosis
5. Apparent leg length
6. Actual leg length