Spinal Cord Stimulation: Difference between revisions
No edit summary |
No edit summary |
||
| Line 24: | Line 24: | ||
=== Burst Stimulation === | === Burst Stimulation === | ||
Low frequencies (40 Hz) with 5 closely spaced pulses (1 ms) at 500 Hz per burst, or 3 pulses at 100 Hz, followed by a repolarisation phase | Low frequencies (40 Hz) with 5 closely spaced pulses (1 ms) at 500 Hz per burst, or 3 pulses at 100 Hz, followed by a repolarisation phase | ||
=== High Frequency Stimulation === | === High Frequency Stimulation === | ||
Revision as of 01:41, 29 February 2024
Original Editor - Sehriban Ozmen
Top Contributors - Sehriban Ozmen
This article or area is currently under construction and may only be partially complete. Please come back soon to see the finished work! (29/02/2024)
Description[edit | edit source]
Action Mechanisms[edit | edit source]
Stimulation Paradigms[edit | edit source]
Tonic / Conventional Stimulation[edit | edit source]
Frequency: 35-80 Hz
Pulse width: 200-450 μs
Amplitude: 5-6 mA
Burst Stimulation[edit | edit source]
Low frequencies (40 Hz) with 5 closely spaced pulses (1 ms) at 500 Hz per burst, or 3 pulses at 100 Hz, followed by a repolarisation phase
High Frequency Stimulation[edit | edit source]
Frequency: 10 000 Hz
Pulse width: 30 ms
Low amplitude (approximately 2-3 A)
Indications[edit | edit source]
Indications For Pain Management[edit | edit source]
- Failed back surgery syndrome, radiculopathy, and lumbago
- Complex regional pain syndrome
- Diabetic neuropathy and other neuropathies
- Phantom limb pain
- Angina pectoris and peripheral vascular disease
- Neuropathic pain secondary to tumour
Non-Pain-Related Indications[edit | edit source]
- Parkinson’s disease and other movement disorders
- Spasticity
- Spinal trauma rehabilitation
Resources[edit | edit source]
Percutaneous Electrical Nerve Stimulation
