Rotator Cuff Tears


Definition/Description[edit | edit source]

There isn’t an exact definition of a massive rotator cuff tear. Sometimes the severity is expressed by the number of tendons which are torn, sometimes on the size of the tear.

Lädermann et al. speak of a rotator cuff tear when at least two tendons are completely torn. Next to the number of tendons which are torn, at least one of the two tendons must be retracted beyond the top of the humeral head.[1]

These rotator cuff tears can be further divided into 5 categories (according to Collin et al.)[1]:

Rototor cuff tears according to Collin et al

 - Type A: supraspinatus & superior subscapularis tears
- Type B: supraspinatus and entire subscapularis tears
- Type C: supraspinatus, superior subscapularis & infraspinatus tears
- Type D: supraspinatus & infraspinatus tears
- Type E: supraspinatus, infraspinatus & teres minor tear

Other authors speak of a rotator cuff tear that involves one or more of the four tendons that constitute the rotator cuff. The most common tendon affected is the M. supraspinatus. There are a number of classification systems that are used to describe the size, location and shape of rotator cuff tears. Most commonly tears are described as partial- or full-thickness. A commonly cited classification system for full- thickness rotator cuff tears was developed by Cofield (1982). The classification system is:
1. Small tear: less than 1 cm
2. Medium tear: 1–3 cm
3. Large tear: 3–5 cm
4. Massive tear: greater than 5 cm.

Clinically Relevant Anatomy[2]
[edit | edit source]

449px-Rotator cuff high.jpg

The shoulder - or better the shoulder girdle- consists of five joints. Three of them are considered as real. These three real joints are: the glenohumeral joint, the acromioclavicular joint and the sternoclavicular joint. Together with the subacromial joint and the scapulothoracic joint,
the shoulder girdle reaches a large range of motion. Because of this large range of motion, the shoulder girdle is less stable.
The limited passive stability indicates that the primary source of joint stability must be balanced muscle control.
The rotator cuff provides this stability. The rotator cuff exists of four muscles: M. Subscapularis, M. Teres Minor, M. Supraspinatus and M. Infraspinatus.

During shoulder abduction the rotator cuff muscles act together to stabilize the humeral head within the glenoid in a process known as concavity compression.

The rotator cuff muscles contribute to shoulder elevation between 60 and 130 degrees. The Subscapularis muscle makes sure that internal humeral rotation is possible. M. infraspinatus and M. teres minor primarily provide external humeral rotation. All muscles of the rotator cuff, except the M. supraspinatus, ensure that the humeral head stays depressed to balance upward pull of the deltoid early in glenohumeral abduction.



Epidemiology/Etiology[edit | edit source]

Rotator cuff tears are the leading cause of shoulder pain and shoulder-related disability. The pathogenesis of these tears is still partly unknown.

Rotator cuff tears can be caused by degenerative changes, repetitive micro traumas, severe traumatic injuries, atraumatic injuries and secondary dysfunctions . [3]
Traumatic injury to the rotator cuff can be caused by falling on an outstretched hand, by an unexpected force when pushing or pulling, or during shoulder dislocation.
Normal age-related muscle deterioration and excessive repetitive motions are examples of atraumatic causes[3].

There are many other etiologies implicated in the pathogenesis of rotator cuff tears. Extrinsic factors such as subacromial and internal impingement, tensile overload and repetitive stress can lead to a higher risk of rotator cuff tears.
Intrinsic factors such as poor vascularity, alterations in material properties, matrix composition and aging are also involved.(level of evidence: 3a)
Smoking and inflammation of the joint capsule (frozen shoulder) can also lead to a higher risk for a rotator cuff tear. Also, thyroid pathologies could play a role in rotator cuff tear pathology. But this relationship needs more research.

Comorbidities of rotator cuff tears are hormone-related gynecologic diseases, autoimmune pathologies, rheumatoid arthritis and type 1 diabetes mellitus.


Characteristics / Clinical Presentation
[edit | edit source]

The location of the tear has an important influence on the possible dysfunctions.

Individuals with a rotator cuff tear may suffer from[1]:
- severe pain at time of injury
- pain at night
- pain with overhead activities
- positive painful arc sign
- weakness of involved muscle
- shoulder stiffness.

Individuals with a tear of the supraspinatus may complain of tenderness over the greater tuberosity, pain located in the anterior shoulder and symptoms radiating down the arm.


Differential Diagnosis[edit | edit source]

Rotator cuff tears must be differentiated from rotator cuff tendinopathy and from bursitis (subacromial bursitis). Arthrography or ultrasonography can make this distinction.

Additional differential diagnosis to look out for are:
- Acromioclavicular injury
- Glenoid labrum tear : Slap lesion, Bankart lesion
- Cervical pathology: Cervical nerve root injury, Cervical Radiculopathy, Cervical Spondylosis
- Subacromial Impingement
-Osteoarthritis, Rheumatoid Arthritis
- Shoulder Instability
- Subscapular nerve entrapment
- Scapulothoracic bursitis
- Adhesive Capsulitis
- Biceps Tendonitis
- Calcific Tendonitis Shoulder
- Parsonage Turner Syndrome, Thoracic Outlet Syndrome
- Glenohumeral ligament tears or sprains

Diagnostic Procedures[edit | edit source]

Many factors are considered in diagnosing rotator cuff tears. Subjective history including mechanism of injury, activities that aggravate or ease pain, current limitations to function and physical examination findings. Additionally, diagnostic imaging is used to make the diagnosis.

Diagnosis is based on:
1. History:
The therapist should check for yellow flags for shoulder injuries:
- Passive coping tendencies
- Depression
- Fear Avoidance Beliefs
- Pain Syndromes
- Concurrent Psychological Illness
- Worker’s Compensation
- Lack of family/community Support
2. Clinical examination (see 9. Examination): active and passive range of motion, strength tests and rotator cuff tests
3. X- rays (to exclude sclerosis and osteophyte formation on the acromion)
4. MRI and ultrasound
5. IMPT (isokinetic muscle performance test): to estimate the functional status of the rotator cuff muscles[4]

Outcome Measures
[edit | edit source]

The following list contains commonly used shoulder outcome measures and is not at all complete. Your own clinical judgment will be necessary to determine the most useful measure in your clinical setting.

PSS is used to measure outcome of patients with various shoulder disorders. It’s a 100-point questionnaire consisting of 3 subscales: pain, function and satisfaction.

  • Global Rating of Change Scale (GRCS) [7]

This test rates the changes in symptoms, in this case, in the shoulder. It compares the symptoms with those from 12 months earlier. There are 15 possible scores, ranging from -7 (the worst) to +7 (the best).

  • Rotator Cuff Quality of Life Score (RC-QOL) [9] [10]

The RC-QOL is a disease-specific outcome measure that evaluates the impact of rotator cuff diseases on the general quality of life. It is a questionnaire with 34 items, divided into 5 domains.
These 5 domains are:
- Symptoms and physical complaints
- Work-related concerns
- Sports and recreation
- Lifestyle issues
- Social and emotional issues.

  • Functional Shoulder Elevation Test (FSET) [9]

The SPADI is created to measure pain and disabilities associated with shoulder pathology in patients with shoulder pain of musculoskeletal, neurogenic or undetermined origin. There are 2 domains, pain and disability, with 13 items. Pain contains 5 items and activities contain 8 items. Every item is scored on a visual analogue scale, ranging from 0 (no pain/no difficulty) to 10 (the worst pain imaginable/so difficult that help is required).

  • American Shoulder and Elbow Surgeons score (ASES) [5]

The ASES is used to measure shoulder pain and functional limitations in patients with musculoskeletal complaints. The pain is measured with a visual analogue scale.

  • UCLA Shoulder Score [11]

The self-report part of the measure consists of 2 single-item subscales (pain and function). These are Likert-type scales and are scored from 1 to 10: a higher score indicates a lower pain and greater function.

  • Simple Shoulder Test (SST) [11]

The SST is a function scale with 12 items, used to assess improvement in shoulder function after treatment interventions and to check the patient’s ability to tolerate or perform 12 activities of daily living. The scores range from 0 to 100 and are reported as the percentage of items that were answered.


Examination[12][edit | edit source]

The diagnosis of a rotator cuff tear can be established by a careful history and a structured physical examination. The physical examination should include inspection and palpation, range of motion testing, strength testing and special tests.

Active and passive range of motions that the clinician needs to test are: forward flexion, abduction and internal/external rotation at 0° and 90°. Rotator cuff tears lead to loss of active range of motion, passive range of motion is often preserved.

Strength can be tested using a portable hand-held dynamometer. Each motion is predominantly exerted by a specific muscle. We test the external rotation force for the infraspinatus muscle, abduction for the supraspinatus and internal rotation for the subscapularis muscle. Rotator cuff tears often present with shoulder weakness. The examiner must disregard the muscle performance measurement if it is determined that the patient in appropriately used other musculature to complete the task.

There are many special tests described for examination of the rotator cuff. A few are presented here. A positive test implies that the respective tendon is torn. A test is positive when a position cannot be executed or maintained.

Tests for subscapularis[12]:
- Lift-off test and Passive Lift Off Test
- Belly Press
- Belly-off sign
- Bear Hug Test


Tests for Supraspinatus and infraspinatus[12]:
- External rotation lag sign: 0° and 90°
- Jobe’s test
- Drop arm test
- Neer test [13]

Test for Teres minor[12]:
- Hornblower’s Sign

To enhance the ability to detect full-thickness rotator cuff tears, a test-item cluster has been developed. A cluster improves the post-test probability for the clinical diagnosis of a full-thickness tear[14] .

The results of the physical examination should be put in clinical context with the presentation of the patient and the findings from images.


Medical Management[15][edit | edit source]

There are three types of surgical treatments to repair rotator cuff tears.

  • Open repair

A traditional open surgical incision is often required for large or complex tears.

  • Arthroscopic Repair

An optical scope and small instruments are inserted through small puncture wounds instead of through a larger incision. The operation can be carried out under visual control via a video display.

  • Mini-Open Repair

New techniques and instruments allow surgeons to perform a complete recovery of the rotator cuff through a small incision of generally 4 to 6 cm.

The operative treatment is done mostly arthroscopically which is less invasive than open/mini-open surgery and leaves only a few small scars. The rehabilitation can start faster and the patient has less pain during recovery.


Physical Therapy Management[edit | edit source]

Conservative management is warranted in most rotator cuff injuries. In addition to physical therapy, non-surgical treatment may include non-steroidal anti-inflammatory drugs and steroid injections, time, local rest, application of cold or heat and massage. The judicious use of no more than three to four injections of steroids into the subacromial space or around the biceps tendon can be helpful in the early phase[16].

During examination and rehabilitation, it is important to isolate the individual rotator cuff muscles as much as possible. This because the rotator cuff muscles can become fatigued, injured or atrophied individually[17]. Physical therapy has a beneficial effect when it’s part of a treatment programme[18]. (level of evidence: 2A)

  • Goals to be achieved with physical therapy[19]: (level of evidence: 3B)

- Reducing pain and muscle tension in the scapular and neck area in order to promote the motility of the scapula. This to ensure the correct position of the glenoid. The muscles targeted are the M. pectoralis minor, upper trapezius and M. levator scapulae.
- Improving the wrong humeral head position in order to restore scapulo-humeral mobility.
- Strengthen the muscles that stabilize and move the shoulder, the upper part of the M. serratus anterior and the intact rotator cuff muscles.
- Regain proprioception and movement automatism by neuromotor rehabilitation

Both nonoperative rehabilitation and postoperative rehabilitation of the rotator cuff involves the following principles.

  • Reduction of overload and total arm rehabilitation

- There should be no compensatory actions in the upper extremity.
- It is advised to quickly use the elbow, forearm and wrist in order to strengthen them. Especially during long immobilization.
- Mobilization of the scapulothoracic joint and submaximal strengthening of the scapular stabilizers are indicated. The injured tissues should not be inappropriately stressed or loaded.
A technique which is used early in the rehabilitation phase is the scapular protraction and retraction resistance exercise. It involves a side-lying position and specific hand placement to resist scapular protraction and retraction without stress applied on the glenohumeral joint. This exercise begins at low resistance. The glenohumeral joint must be in slight abduction and forward flexion during scapular motion.

Scapular resistance exercise









  • Restoration of normal joint arthrokinematics

- Posterior capsular mobilization and stretching techniques are often indicated and applied to improve internal rotation ROM.

  • Promotion of muscular strength balance and local muscular endurance


EXAMPLES OF OPEN CHAIN EXERCISES (Book:Physical therapy of the shoulder, Robert A.[20] )

  • Side-lying external rotation

Lie on uninvolved side, with a small pillow between involved arm and body. Keep the elbow of involved arm bent and fixed to side, raise the arm into external rotation. Slowly lower to starting position and repeat.

External rotation








  • Shoulder extension

Lie in prone position on a table. The involved arm is hanging straight to the floor. With the thumb pointed outward, raise the arm straight back toward your hip. Slowly lower the arm and repeat.

Shoulder extension









  • Prone horizontal abduction

Lie in prone position on a table. The involved arm is hanging straight to the floor. With the thumb pointed outward, raise the arm out to the side, parallel to the floor. Slowly lower your arm and repeat.

horizontal abduction








  • 90/90 external rotation

Lie in prone position on a table. The shoulder is abducted to 90° and the arm is supported on the table. The elbow is bent at 90°. Keep the shoulder and elbow fixed and rotate the arm into external rotation. Slowly lower to starting position and repeat.

External rotation







EXAMPLE CLOSED CHAIN EXERCISE

  • The therapist applies rhythmic stabilization or perturbation stresses with the patient’s shoulder placed in the scapular plane and 90° of elevation.
Rhythmic stabilization











Late stages of rehabilitation of rotator cuff injury include progressive resistive strengthening, proprioception training and sport-specific exercises. Thrust and non-thrust manipulation (TSTM) of the cervicothoracic spine and/or ribs may lead to significant improvement in pain and disability in patients with a primary complaint of shoulder pain[4] [21] . The use of TSTM with shoulder patients can be described as the relationship of restoring mobility between adjacent vertebrae. This can be recognized as a reflexogenic mechanism.TSTM can not only be used to improve shoulder mobility but also the overall functional performance.


Key Research[edit | edit source]

No randomized control trials have found an optimal conservative management of rotator cuff tears. Several studies have shown reduction in pain and disability by treating regions other than the shoulder.


Resources[edit | edit source]

Rotator cuff tears and rehabilitation, Richard Hawkins, M.D.:

 


Rotator cuff tear and rehabilitation, Dr. Sean Simmonds:


Rotator cuff tear: Diagnosis & treatment


American Academy of Orthopaedic Surgeons: Rotator cuff tears


Clinical Bottom Line[edit | edit source]

Physical therapy has a beneficial effect in the treatment of rotator cuff tears, when it’s part of a treatment program. Goals of the rehabilitation, nonoperative and postoperative, are reducing pain and muscle tension, improving wrong humeral head position, strenghten the stabilizing muscles and regain proprioception and movement automatism. Physical therapy consists of passive and active mobilization and strengthening exercises (open en closed chain). Late stages of rehabilitation of rotator cuff injury include progressive resistive strengthening, proprioception training and sport-specific exercises.


Conservative Management of a Large Rotator Cuff Tear to Increase Functional Abilities: A Case Report


Recent Related Research[edit | edit source]

References[edit | edit source]

  1. 1.0 1.1 1.2 Lädermann, Alexandre, Patrick J. Denard, and Philippe Collin. "Massive rotator cuff tears: definition and treatment." International orthopaedics (2015): 1-12. (2C)
  2. N. Yamamoto, A review of biomechanics of the shoulder and biomechanical concepts of rotator cuff repair. Asia-Pacific Journal of Sports Medicine, Arthroscopy, Rehabilitation and Technology. Volume 2, Issue 1, January 2015, Pages 27–30. (2A)
  3. 3.0 3.1 H.Horng-Chaung, Influence of rotator cuff tearing on glenohumeral stability, Journal of Shoulder and Elbow Surgery, 1997, pp 413 – 422, (2B), (E)
  4. 4.0 4.1 Han Oh et al. Isokinetic Muscle Performance Test Can Predict the Status of Rotator Cuff Muscle. Clin Orthop Relat Res. 2010 June; 468(6): 1506–1513. (2B), (C)
  5. 5.0 5.1 5.2 Jean-Sébastien Roy. Measuring Shoulder Function: A systematic Review of Four Questionnaires. Arthritis & Rheumatism, vol 61, No 5, 2009, pp 623- 632. (1A), (A)
  6. Brian G Leggin. The Penn Shoulder Score: Reliability and validity. Journal of Orthopaedic & Sports physical therapy. 2006; 36: 138-151. (2B), (B)
  7. Steven J Kamper. Global Rating of change scales: A review of strengths and weaknesses and considerations for design. The Journal of Manual & Manipulative Therapy. 2009; 17(3): 163-170 (1A), (A)
  8. Mohammed N Yasin. The reliability of the Constant-Murley shoulder scoring system. Shoulder and Elbow 2010; 2, pp 259-262. (2B), (C)
  9. 9.0 9.1 Hollinshead RM. Two 6-year follow-up studies of large and massive rotator cuff tears: comparison of outcome measures. J Shoulder Elbow Surg. 2000 sep-oct; 9(5): 373-81. (3B), (C)
  10. Rocco Papalia. RC-QOL score for rotator cuff pathology: adaptation to Italian. Knee Surg Sports Traumatol Arthrose – Shoulder 2010, 18: 1417-1424. (2B), (C)
  11. 11.0 11.1 Roddey T. S. Comparison of the University of California-Los Angeles Shoulder Scale and the Simple Shoulder Test with the Soulder Pain and Disability Index: Single –Administration Reliability and Validity. Journal of the American Physical Therapy Association. 2000; 80:759-768. (2B), (B)
  12. 12.0 12.1 12.2 12.3 Jain, Nitin B., et al. "Clinical examination of the rotator cuff." PM&R 5.1 (2013): 45-56. (2A)
  13. van Kampen, Derk A., et al. "The diagnostic value of the combination of patient characteristics, history, and clinical shoulder tests for the diagnosis of rotator cuff tear." Journal of orthopaedic surgery and research 9.1 (2014): 1. (1C)
  14. Smith M, Smith W. Rotator cuff tears: an overview. Orthopaedic Nursing [serial online]. September 2010;29(5):319-324. Available from: CINAHL, Ipswich, MA. Accessed March 17, 2011
  15. Millar N.L. et al. Open versus two forms of arthroscopic rotator cuff repair. (2009) Clinical Orthopaedics and Related Research, 467, 966-78 (3A)
  16. Fukuda H, The Management of PArtial Thickness Tears of the Rotator cuff. The Journal of Bone and Joint Surgery, 2003, pp 3 -11. (1A), (A)
  17. Jobe, Frank W., and Diane Radovich Moynes. "Delineation of diagnostic criteria and a rehabilitation program for rotator cuff injuries." The American journal of sports medicine 10.6 (1982): 336-339.
  18. Ainsworth, Roberta, and Jeremy S. Lewis. "Exercise therapy for the conservative management of full thickness tears of the rotator cuff: a systematic review." British journal of sports medicine 41.4 (2007): 200-210. (2A)
  19. Collin, P. G., et al. "Is rehabilitation effective in massive rotator cuff tears?." Orthopaedics & Traumatology: Surgery & Research 101.4 (2015): S203-S205. (3B)
  20. Donatelli, Robert A. Physical therapy of the shoulder. Elsevier Health Sciences, 2011.
  21. Van der Hoeven H. et al. Shoulder injuries in tennis players. Br J Sports Med. 2006 May; 40(5): 435–440. (1A), (A)
  22. Sambandam, Senthil Nathan, et al. "Rotator cuff tears: An evidence based approach." World journal of orthopedics 6.11 (2015): 902.
  23. Thigpen, Charles A., et al. "The American Society of Shoulder and Elbow Therapists' consensus statement on rehabilitation following arthroscopic rotator cuff repair." Journal of Shoulder and Elbow Surgery 25.4 (2016): 521-535.