Assistive Devices for Cerebral Palsy

Introduction[edit | edit source]

Many children with Cerebral Palsy can be more independent with the help of (simple) equipment. These devices aim to help the individual improve their quality of life and lead a more independent lifestyle.

There is vast array of assistive devices that can prove useful for a child with CP. The selection of devices depends upon the needs of child. While choosing an assistive device, it is important to note that[1]:

  • There is no one size which fits all
  • Each child is different. Be creative and find different ideas.
  • Discuss with the child and the family first: do not give people equipment because you think it is needed. Make sure the family wants to use it.
  • Children grow, so the equipment should grow with them.

Advantages of Assistive Devices in CP[edit | edit source]

There are a variety of pros of using Assistive devices in CP. The use of such devices can:

  1. Inspire confidence, improve quality of life.
  2. Make the child more self-sufficient and independent.
  3. Give improved Educational Outcomes – provide tools needed to keep up with school curricula.
  4. Increase Understanding – Comprehension, reading ability, and vocabulary improve, reducing the learning curve for children facing CP.
  5. Facilitate Communication– Aid in expressing feelings, as well as help in understanding those of others.
  6. Prove to be a support for Caregivers – reinforce understanding between patients and caregivers, ensuring parents recognize and accurately interpret feedback from the child.
  7. Lead to occupational gains in the long term.

Types of Assistive Devices[edit | edit source]

The Assistive devices can cover a range of areas:

  1. For better mobility
  2. For better communication
  3. For help in ADLs
  4. For better participation in society

Comprehensive rehabilitation and assistive devices are an integral part of life for patients with CP throughout their lifespan[2].

Below are some photos of assistive devices that are not necessarily correct for the child:

CP wchair.jpg
CP chair.jpg
CP supportive chair.jpg
Wheelchair is far too big for him,  but the grandmother, who is taking care of him is very happy with it, because she does not need to carry him
The chair does not support him enough: not helping to keep his head up, the knees are “falling” side-wards, the arms are turned inwards.
This is a very floppy boy; and reflects the reality. This picture was taken when trying to find a better chair and sitting position for him
Does not look as if she needs this much support;
This girl could sit independently; just needed a chair so she could put her feet on the floor; no need for a special chair.

Orthoses[edit | edit source]

These are external devices that are often required to keep joints working properly in the upper and lower limbs. They can help improve walking, decrease contracture and increase endurance. They also help to reduce trips or falls. They are made from a variety of materials with some very fashionable patterns now. They are generally slid or strapped on with Velcro

Case Study[edit | edit source]

Roelie Wolting, our Cerebral Palsy expert, has reported on a Doctors Review of Assistive Chairs for children with Cerebral Palsy:

A doctor was doing research on the causes of disability in children. He was meeting a lot of children with Cerebral Palsy and their families. The children were usually lying on a mattress and did not have any assistive devices. The doctors wrote a project proposal for an Embassy in order to be able to provide all these children with special chairs specifically designed for Cerebral Palsy. He was granted the money and had the chairs made by a local carpenter. He then gave the chairs to the families and asked them to have the child sit in the chair because that is much better for the development of the child. After three years the doctor wanted to know what had been the impact of these chairs on the development of the children and their families so he visited all families again. He found that 95% of the chairs were not being used.

Here are some of the reasons why they were not used:

  • The children could not sit comfortably in the chairs because they were not ‘custom-made'. If a chair is not comfortable, nobody wants to sit on such a chair for hours.
  • The chairs were often too big for the small family rooms.
  • The doctor thought this would help the family but he did not discuss with the family their needs and their priorities.
Toilet chairs.jpg

Here is a picture of assistive chairs being distributed, a 'one size fits all.' This is still done in many countries today.



Assistive Devices for Children with Cerebral Palsy[edit | edit source]

You can find many ideas for assistive devices for children with cerebral palsy. One of the books to get ideas from is: Disabled Village Children. Some of the chapters are listed below in additional resources.

The most important things to remember when looking at providing an assistive device for a child with cerebral palsy are:

  • That it fits the needs of the child and the family and,
  • It is made to measure for the child / it fits the child

Here are some ideas of different assistive devices from eating to walking. 

Deep bowls.png
Half cups.png
Knife and spoon.png
Cups.png
Deep bowls can make it easier to get food onto a spoon Cups with cutouts can allow for easier drinking as the child does not have to extend their neck as much. Adaptive cutlery makes it easier to hold and use. Cups with handles and lids make it easier to handle and avoid spillages if there is difficulty with motor control.
Spoon hand strap.png

Tire tube spoon.png
Slip mat eating.png
CP wedging.png
Spoon with hand strap can help if there is difficulty with fine motor control and the child cannot grip efficiently Some form of rubber around the handle of the spoon can assist with grip. Non-slip mats under the plate can prevent the plate from moving around if there is difficulty with motor control.  Wedges under a child may help promote cervical extension and use their arms for play

Walkers[edit | edit source]

There are two types of walkers for pediatric use: anterior walker and posterior or reverse walker.
The posterior walker in the majority of children with CP is the most appropriate as it provides the best gait pattern and is less energy-consuming. Standard anterior walkers lead to increased weight bearing on the walker and increased hip flexion during gait. Choose them only in cases where extensor spasticity predominates. Children with spastic diplegia have problems with posterior balance and tend to fall backward. In this case, prescribe a walker. The child who walks very slowly in a high guard position and falls backward after a few steps will benefit from a posterior walker as an aid to improve his balance.

Reverse walker.png
Anterior walker.jpg

Posterior Walker Anterior Walker



Additional Resources[edit | edit source]



References[edit | edit source]

  1. Huang IC, Sugden D, Beveridge S. Assistive devices and cerebral palsy: factors influencing the use of assistive devices at home by children with cerebral palsy. Child: care, health and development. 2009 Jan;35(1):130-9.
  2. Zeńczak-Praga K, Zgorzalewicz-Stachowiak M, Cesar K. Analysis of using assistive devices by patients suffering from cerebral palsy-preliminary report. Polski Merkuriusz Lekarski: Organ Polskiego Towarzystwa Lekarskiego. 2015 Nov 1;39(233):311-5.